ADX Surface Grinder

New Equiptop ADX Series Precision Automatic Surface Grinder

ADX SERIES ADX450 ADX6150 ADX: FULLY AUTOMATIC IN 3AXIS (X. Y. Z.) WITH STEPPING MOTOR FOR DOWNFEED, AC MOTOR FOR RAPID UP/DOWN, AND DIGITAL POSITIONING. GENERAL FEATURES OF ADX SERIES: 1. COLUMN: Enlarged, honeycomb-ribbed column, especially suitable for heavy duty grinding (for ADX500-1000).Enlarged column and base create high stability and rigidity. The height of column is increased up to 18" (460mm) from table surface to the centreline of spindle (for ADX450). 2. CONSTRUCTION: Construction of table, saddle and base is cast with high grade casting iron, strongly ribbed. 3. SPINDLE: High precision cartridge type spindle is supported by two preloaded precision angular contact Ball bearings & one NN type Roller bearing and driven by V3 class motor that allow high accurate grinding performance for ADX450. Enlarged spindle set is supported by four preloaded precision angular constant Ball bearings & one NU type Roller bearing for heavy duty (ADX500-1000). 4. SLIDEWAYS: Vertical, cross (double V) and longitudinal (one V & one flat) slideways are coated with Turcite-B, provides stable movement and durable accuracy. 5. AUTOMATIC CONTINUOUS LUBRICATION SYSTEM: All slideways and screws are fully oiled by Automatic Continuous Lubrication System to eliminate wears on slideways & screws. 6. CROSS FEED: Ballscrew for cross travel, powered by DC Servo motor. 7. HYDRAULIC TABLE: For all models, the longitudinal movement is driven by hydraulic system. With rack and pinion table drive for hand operation. 8. PROXIMITY SWITCH: Provide built-in-type (hidden) proximity switch, features safe and easy operation. 9. TABLE SPEED CONTROL: Pre-settable hydraulic table speed control allows operator to pre-set speed rate, enable to get same speed rate when engaging hydraulic table every time (for ADX500-1000). ADX SERIES FUNCTIONS LONGITUDINAL HYDRAULIC, CROSS FEED MOTORIZED WITH AUTO INFEED & SPEED ADJUSTABLE CONSTANT FEED, VERTICAL DC SERVO & STEP MOTOR CONTROLLED, VERTICAL RAPID & SLOW FEED, 0.0005mm/0.000025" FEED, STEP INCREMENT: 0.001~0.050mm (1~25/10000") ARE AVAILABLE, VERTICAL AUTO INFEED VALUE: ROUGH GRINDING 0.001~0.050mm (1~25/10000"); FINISHING GRINDING 0.0005~0.0095mm (0.25~9.75/10000"). THE FUNCTIONS OF SETTING TIMES FOR SPARK-OUT(1-9 TIMES), VERTICAL DIGITAL POSITIONING SETTING ZERO POINT, START GRINDING POINT, FINISHING GRINDING VALUE, TARGET POINT, WHEEL RISE POINT). AUTO SPARK-OUT THEN RISE UP AUTOMATICALLY ARE AVAILABLE. MODEL: DESCRIPTIONS: ADX 450 ADX 500 ADX 600 ADX 700 ADX 800 ADX 1000 Table size ¡@ 203x460mm (8x18") 254x508mm (10x20") 300x600mm (11 13/16x 23 5/8") 305x712mm (12x28") 406x813mm (16x32") 406x1020mm (16x40") Max. Distance from table surface to spindle centerline 460mm (18") 500mm (19 5/8") 585mm (23") Standard Column: 630mm (24 3/4"), Optional high Column: 720mm (28 5/16") Grinding Spindle Drive Power Rating 2.0HP 3.0HP 5.0HP Standard: 5.0HP, OPTIONAL: 7.5HP, 10HP Standard grinding Wheel Diameter 203mm (8") 304mm(12") 355mm (14") Width 12.7mm (1/2"), Max. 19mm (3/4") 19mm (3/4"), Max.25mm (1") 31.75mm (1 1/4") 50mm(2") Bore 31.75mm (1 1/4") 76.2mm (3") 127mm (5") MODEL: DESCRIPTIONS: ADX 6120 ADX 6150 ADX 6200 ADX 8150 ADX 8200 ADX 8300 Table size   610x1260mm (24"x48") 610x1560mm (24"x60") 610x2060mm (24"x80") 810x1550mm (32"x60") 810x2050mm (32"x80") 810x3050mm (32"x120") Max. Distance from table surface to spindle centrelines 850mm (33.5") Grinding Spindle Drive Power Rating Standard: 10HP/6P (7.55Kw); Optional:15HP/6P (11.25KW), Standard: 20HP/6P(15Kw); Optional:25HP(18.75KW), 30HP (22.5Kw) Standard grinding Wheel Diameter 510mm (20") Width 50mm (2") 76mm (3") Bore 127mm (5") MODEL: DESCRIPTIONS: ESG-3A2448 ESG-2448D ESG-3A2460 ESG-2460D ESG-3A3260, ESG-3260D ESG-32120, ESG-32120D Table size ¡@ 610x1260mm (24"x48") 610x1560mm (24"x60") 810x1550mm (32"x60") 810x3050mm (32"x120") Max. Distance from table surface to spindle centreline 850mm (33.5") 850mm (33.5") Grinding Spindle Drive Power Rating Standard : 10HP/6(7.5KW) Optional: 15HP/6P(11.25KW) Standard : 20HP/6P (15KW) Optional: 25HP (18.75KW), 30HP (22.5KW) Standard grinding Wheel Diameter 510 mm (20") 510mm (20") Width 50 mm (2") 76 mm (3") Bore 127 mm (5") 127 mm (5")